| |
With the possibility to operate with several abrasive
materials such as sand, steel grit, stainless steel grit,
aluminum oxide, plastic abrasive materials etc., it is the
equipment indicated for surface finishing, cleaning of
metallic parts, matting, removal of lamination scales,
preparation for paint anchorage, metal plating, plasma,
rubber coating, for decoration or engraving through glass
masks, plastics, metals, finishing and trimming.
The Multi Abrasive Blasters, model P have been designed to
operate with a pressure of up to 7.7 Bar (110 PSI). They are
built according to the ASME standard, revision 2001, section
VIII, division I, and meet the most important international
safety standards such as, for example, 97/23/EC and the
Brazilian NR-13. The pressure vessel is welded by the
submerged arc process by qualified welders, and all
equipment is hydrostatically tested at a pressure of 12 Bar
(170 PSI). The blasters are also equipped with the following
original accessories: manometer, abrasive material
classifying screen, lifting handle or hook, inspection
window, spherical valve for air intake, pop-up valve built
in polyurethane with semi-spherical shape that ensures
better sealing, spherical air dosing valve, spherical valve
for depressurization, centrifuge moisture separator, and
abrasive material dosing valve with a calibrated hole, which
foregoes the need for adjustment, enables higher
productivity and has a very low maintenance cost..
It is indispensable for the client, when acquiring a machine
that comes equipped with all items above, to also acquire a
nozzle/hose kit, as well as an actuation kit and an operator
protecting kit (which must be approved by the local
authorities). The most widely used kits are described on the
reverse page of this catalog. Besides the above kits, the
following are also optionally supplied with the equipment:
casters, wet blasting nozzles, nozzles and devices for the
internal blasting of tubes, coalescent filter, etc.
The pressurized blasters are produced with a capacity of 42
to 4,500 liters (1.5 to 160 cu. ft.), with outlets for one
or more operators, and with a single or double chamber. On
the reverse side of this catalog, we provide the
characteristics of the best selling models. All appliances
can operate with blasting rooms with automatic or
semi-automatic reclaim of abrasive material.
|
OPERATOR PROTECTION KITS
Economical
For sporadic use, preferably with abrasive materials
that do not contain silicon. Aluminum helmet, glass peep
hole, screen protector, induced air inlet in the rear,
nylon jacket, mini - filter in activated charcoal, air
dosing valve, a pair of leather gloves, air hose.
Industrial
For constant use, it ensures total protection and
comfort to the operator.
Helmet in plastic, with panoramic peep hole, air inlet
in the rear, through a duct dimensioned for the
reduction of noise, eye shade in high-resistance nylon
with sealing collar, a filter with activated charcoal
equipped with pressure / flow regulator and manometer.
|
|
ACTUATION KITS
Industrial - A
For constant use, capable of operating in machines with
multiple outlets. By actuating the trigger at the end of
the hose it is possible to release and / or interrupt
the flow of abrasive material by throttling the blasting
hose. The hose segment where the closing of one cylinder
occurs is special, since its (double) constructive form
prevents the occurrence of leakages, even when it is
worn.
Industrial - B
This one is also for constant use, and is indicated
mainly where one wishes to combine the interruption of
blasting with the reload of the machine. The air intake
and depressurizing valves are controlled in conjunction
by the trigger at the tip of the hose. The blasting
machine will be automatically pressurized when the
trigger is actuated, and depressurized when the trigger
is released. |
|
|
