Practicality with High Performance

Indicated for the blasting and shot peening of forged, punched, injected and casted parts, can operate with steel shot or steel grit among other abrasive medias. Features fast work cycles due to high efficiency blast wheels combined with good blast wheel power and batch size ratio.
Other characteristic of this family of machines is the wider abrasive separator built in at the machine lower part, which provides a superior abrasive separation combined with a major reduction on the machine height.

Technical Specifications

Exhaust system: extremely compact, mounted next to the machine body, comes with an automatic filtering media cleaning and residues unloading system. It achieves a residual dust emission below 1 mg/m3, fulfilling the major environmental and occupational health regulations.

Blast wheels: double sided with curved blades, providing a higher volume and velocity than the conventional blast wheels of the same power. It is made from extremely abrasive resistant materials, thus having longer useful lifetime and lower operational costs.

Work door: with manual opening on the 60 and 80 liters models and pneumatic on the 160 and 320 liters units. The door has labyrinth type sealing and safety lock that do not allow the opening while the blast wheel is working.

Control panel: mounted in an armored enclosure next to the machine body, fulfills the electric norms, is equipped with amperage meter and has friendly interface for the equipment operation.

Optionals: Mechanical skip loader for the 80, 160 and 320 liters models, frequency inverters for the blast wheels and or belts, rotating or vibratory sieve, pneumatic door for the 80 liters model.

Remarks:
The above data is for machine operating at 60Hz, while on 50Hz the velocity of abrasive thrown is of 75 m/s and the volume of abrasive thrown is approximately 20% higher than informed at this table. The specifications are subject to change without prior notice.