Designed to meet the most severe environmental standards, it is adequate for all applications in which the residue or the collected dust do not have to be kept dry, as well as for gasses. It is especially indicated for applications in which there is the risk of an explosion or that have wet particles, such as, for example, the aluminum dusts and the liquid paint residues.

Since it features an automatic residue discharging system, it is indicated for applications in which the volume of dust or residues is large. It is certainly the equipment with the lowest operational cost in existence on the market, since the filtering element is the water itself, which remains in a closed circuit, and is consumed only by evaporation or by absorption.

The collector is built in a welded structure that is coated with a highly corrosion resistant paint. The conveyor that removes the residues that settle, by drowning them in the dust collector, is built in stainless steel and is driven by a gear motor with permanent lubrication, which grants great durability to the assembly. In a few cases, such as for example, liquid paint residues, it is indispensable to add to the water products that cause the decanting. We always recommend adding anti-oxidants to the water. In some applications such as, for example, blasting it is indispensable.

The CPU model wet filters are extremely compact, and occupy less space that the conventional filters. The operating system is fully automatic, it is sufficient to have a water feeding source, and the buoy system will automatically control the necessary water level and the conveyor belt in stainless steel will remove the residues without the interference of the operator.

The operating principle of the CPU wet collector is that the air stream produced by the fan builds a turbulence in the water that is deposited at the lower part of the collector. At the water level, there is a saw tooth type deflector whose height is adjustable and has the function of controlling this turbulence. With this procedure, the air that was contaminated by dust or other residues gets in contact with the water. The heavier particles or those with a higher water absorption capacity settle immediately on the conveyor belt, the lighter ones, even though involved by the water, end up by joining the air stream. A series of deflectors mounted along the walls of the collector retain this contaminated water, which returns to be reused, and these impurities end up by also settling on the conveyor belt.

Serial items

The CPU model wet dust collectors are equipped with the following serial items:

• Inspection door.
• Automatic loading buoy.
• Automatic unloading system.
• Fan or motor fan dimensioned for each application.

The wet dust collectors are manufactured in the standardized models listed below, which can be conjugated to meet larger outflows: